BLUETTI · Flexible
BLUETTI 100W Flexible Solar Panel (PV100 FX)
Solar savings: 2 panels — 10%; 3 panels — 13%; 4 panels — 15%; 5 panels — 18%. Maximum 5 panels per purchase; mix models. Panels inside kits do not count. Offers do not stack.
Based on 1 separately purchased panel after adding this selection. Final total is confirmed in your bag.
Overview & Key Strengths
Why this solar panel
The BLUETTI PV100 FX 100W Flexible Solar Panel is an ultra-thin, roof-ready monocrystalline panel weighing just 5.1 lb (2.3 kg) that bends smoothly along curved camper van roofs, boat cabins, and overland trailers.
With 23.4% cell efficiency, IP65 weather resistance, and standard MC4 leads, multiple PV100 FX panels can be wired in series or parallel into BLUETTI AC70, AC180, AC200L, and Elite 200 V2 stations.
- Flexible panel, bends up to ~30°.
- 23.4% efficiency.
- For RV roof, boat, and curved surfaces.
- Not a folding book.
- Often sold as a 2×100W set.
Spec sheet
Full specs
- Brand
- BLUETTI
- Model / MPN
- PV100 FX
- Type
- Flexible
- Rated Power
- 100 W
- Connector
- MC4
- Weight
- 6.2 lb / 2.8 kg
- Folded / Panel Size
- 42.9 × 21.1 × 0.1 in / 109.0 × 53.6 × 0.25 cm (flat, bends up to ~30°)
- Cell Chemistry
- Monocrystalline Silicon (Flexible ETFE)
- Cell Efficiency
- Up to 23.4%
- Peak Power
- 100 W
- Open Circuit Voltage (Voc)
- 24.6 V
- Max Operating Voltage (Vmp)
- 20.5 V
- Max Operating Current (Imp)
- 4.9 A
- Flat Dimensions
- 41.5 × 24.1 × 0.1 in (105.5 × 61.2 × 0.25 cm)
- Panel Weight
- 5.1 lb (2.3 kg)
Estimated full-sun charge time
- Small station (300 Wh)
- ~5 h
- Mid station (1,000 Wh)
- ~17 h
0–100% estimate for one panel in strong, direct sun with good angle. Clouds, haze, shade, and the station's own solar-input limit will slow this down in practice.
In action
Reference setups & field deployment
BLUETTI PV100 FX mounted on a curved camper roof
Low-profile flexible laminate contours to curved vehicle roofs with minimal weight and zero wind noise.
Bendable ETFE monocrystalline laminate with metal grommets
Six corner and side grommets support adhesive, strap, or bolt roof mounting.
Top-mounted junction box and Solar MC4 leads
Standard MC4 connectors integrate cleanly with BLUETTI solar input cables.
Highlights
Why it's worth it
- Ultralight 5.1 lb (2.3 kg) flexible composite construction for curved RV, van, and marine roofs
- Up to 23.4% monocrystalline conversion efficiency with ETFE protective top layer
- Pre-drilled metal mounting grommets for adhesive, strap, or bolt installation
- Universal Solar MC4 connectors for series or parallel array building
In the box
What's included
- BLUETTI PV100 FX 100W Flexible Solar Panel
- Pre-Terminated MC4 Leads
- User Manual & Installation Guide
Keep comparing
