Jackery · Rigid laminated bifacial
Jackery SolarSaga 100 Prime
Solar savings: 2 panels — 10%; 3 panels — 13%; 4 panels — 15%; 5 panels — 18%. Maximum 5 panels per purchase; mix models. Panels inside kits do not count. Offers do not stack.
Based on 1 separately purchased panel after adding this selection. Final total is confirmed in your bag.
Overview & Key Strengths
Why this solar panel
The Jackery SolarSaga 100 Prime (JS-100D) is a sleek, all-black rigid-frame bifacial 100W solar panel designed for permanent installation on camper vans, RVs, overland trailers, yachts, and off-grid cabins.
Its unibody anodized aluminum frame with rounded aerodynamic corners reduces wind noise on vehicle roofs, while dual-sided IBC cells capture both direct sky radiation and reflected roof light for up to 20% higher daily yield.
- Semi-permanent bifacial 100W (JS-100E).
- 24.3% efficiency, BNPI 108W.
- IP68, −40…+85°C.
- Flat laminate for a roof/canopy, not a folding book.
- Up to 8 on the 3600 Plus.
Spec sheet
Full specs
- Brand
- Jackery
- Model / MPN
- JS-100E
- UPC / GTIN
- 810105523188
- Type
- Rigid laminated bifacial
- Rated Power
- 100 W
- Connector
- MC4
- Weight
- 13.2 lb / 6 kg
- Folded / Panel Size
- 21.6 × 20.2 × 1.8 in / 54.9 × 51.3 × 4.6 cm
- Cell Chemistry
- Bifacial IBC Monocrystalline Silicon
- Cell Efficiency
- Up to 25%
- Open Circuit Voltage (Voc)
- 24.8 V
- Max Operating Voltage (Vmp)
- 20.0 V
- Short Circuit Current (Isc)
- 5.3 A
- Max Operating Current (Imp)
- 5.0 A
- Panel Dimensions
- 38.8 × 21.7 × 1.1 in (98.6 × 55.2 × 2.9 cm)
- Weather Resistance
- IP68 Waterproof & Dustproof
- Output Connector
- Solar MC4 (plus DC8020 compatibility)
Estimated full-sun charge time
- Small station (300 Wh)
- ~5 h
- Mid station (1,000 Wh)
- ~17 h
0–100% estimate for one panel in strong, direct sun with good angle. Clouds, haze, shade, and the station's own solar-input limit will slow this down in practice.
In action
Reference setups & field deployment
Vehicle roof-rack & camper mounting
Pre-drilled Z-bracket mounting holes and unshaded front IBC cells built for road vibration and weather.
Dual-sided rigid aluminum frame
Anodized aluminum perimeter and tempered glass / ETFE protection with IP68 rating.
Pre-drilled Z-bracket mounting holes
Install on roof racks, camper shells, or boat decks using standard Z-brackets.
Highlights
Why it's worth it
- Bifacial IBC cell technology with up to 25% conversion efficiency and zero front busbars
- Aerodynamic all-black anodized aluminum frame with rounded corners to cut roof wind noise
- IP68 waterproof junction box and tempered glass tested for high wind and snow loads
- Standard Solar MC4 connectors with available DC8020 adapter for Jackery Explorer stations
In the box
What's included
- Jackery SolarSaga 100 Prime Rigid Bifacial Solar Panel
- Set of Z-Brackets & Stainless Mounting Hardware
- User Manual & Installation Guide
